Features
• Side plates red epoxy powder finishing
• Automatic hose reel has integrated automatic stop valve which will open
after 2 revolution of the reel
• Threaded Inlet connection
• Outlet connection for hose can be rotated for left and right direction
• Waterways made from non ferrous metals which ensure corrosion free*
• Maximum working pressure 12bar, test pressure 18bar (EN671-1)
• Maximum working pressure 10bar, test pressure 17bar (AS1221)
• Side plates available in stainless steel

Overview

SRI’s hose rack assembly is located inside buildings at the wet or dry riser outlet.
It features a rack in which hangs the layflat fire hose (30m). An automatic release
mechanism allows water to flow through the hose after removal of the hose and
nozzle. The rack is available in sizes of 1-1/2” and 2-1/2”. There are two methods
of mounting the hose rack. One is by using a wall bracket and the other is by
fixing on to a right angle valve

SRI’s hose rack assembly is located inside buildings at the wet or dry riser outlet.
It features a rack in which hangs the layflat fire hose (30m). An automatic release
mechanism allows water to flow through the hose after removal of the hose and
nozzle. The rack is available in sizes of 1-1/2” and 2-1/2”. There are two methods
of mounting the hose rack. One is by using a wall bracket and the other is by
fixing on to a right angle valve.

Overview 

3 WAY FIRE HYDRANT
Body material : Cast Iron to BS 1561
Outlet : Copper alloy BS 1982
Test pressure : 20 bar (300 psi)
Working pressure : 15 bar (217 psi)
Finishing : Red

Model HYD061-Cl-150-RD can be fitted an underground 6″ gate valve with spindle cap (sluice valve) and operated by using a hydrant key and bar (HYD066-Cl-030-NA)

Overview

2-WA Y & 4-WA Y BRECHING INLET
SPECIFICATION
Body : Ductile Iron
Inlet : BS Instantaneous Male Copper Alloy to BS 1982
Outlet : 2 Way Breeching Inlet Flanged 4” table E. BS 10
: 4 Way Breeching Inlet Flanged 6” table E. BS 10
: 2 Way Breeching Inlet Flanged 4” table D
: 2 Way Breeching Inlet Flanged 3” ANSI
Working Pressure : 10 Bar
Testing Pressure : 20 Bar

Overview 

Selection and installation should be according to MS1539 Part 3.
Inspection and maintenance should be carried out according to MS1593 Part 4

Overview 

FEATURES
• EN3 Approved
• Suitable for Class A, B, C & electrical hazards.
• Ideal for industrial, commercial and domestic enviroment.
• High quality and good value.
• Coluor coded for instant recognition.
• All units tested by electronic leak detection.
• Operation effectively at both high and low temperature

Overview 

FEATURES
• MS Approved
• Suitable for Class A, B, C & electrical hazards.
• Ideal for industrial, commercial and domestic enviroment.
• High quality and good value.
• Coluor coded for instant recognition.
• All units tested by electronic leak detection.
• Operation effectively at both high and low temperature

Overview 

FEATURES
Application area : Storage of flammable liquid
Actuation temperature : 68oC
Working pressure : 14 bar
Installation : Mounting at ceiling height
Test pressure : 25 bar
Material : Cold roll steel
Type of agent : Ammonium Phosphate ABC