Lithium​​​ Battery

  • Long life lightweight
  • Cycle: 3000-6000 (day)
  • 5years warranty @DOD 90%
  • 10years warranty @DOD 70%
  • High quality

Energy Storage​​​ Cabron+

  • Lead cabron+ technology
  • Long life & deep discharge
  • Cycle: 2000-2500(day)
  • 3years warranty @DOD 60%
  • Top quality carbon+

Solar Gel Battery/AGM​​​

  • Solar Gel battery
  • Long life & deep discharge
  • Cycle: 1000-1500(day)
  • 1year warranty @DOD 50%
  • Hight quality

Characteristics

LFR SERIES Lithium Iron Phosphate (LiFePO4)Battery, own the longest life among battery field.
Voltage: 12V, 24V, 48V
Capacity: 12V50Ah~12V200Ah, 24V10Ah~200Ah, 48V10Ah~200Ah
Designed floating service life: 20years @25°C/77°F
Cyclic usage: 100% DOD>3000cycles
Cyclic usage: 80% DOD>4000cycles

> Summary for LifePO4 Batttery for 19’Rank applaction

CSBattery rack mounted Lithium battery (LiFePO₄ battey) solutions are specially designed for PV applications / Solar energy storage system. Cell With UL1642, UL2054, UN38.3, CE, IEC62133 test report approval, thesebatteries have been designed to install flexibly in 19/23″ rack system.

> Features for LifePO4 Batttery for 19’Rank applaction

CSBattery LiFePO4 battery is newest lithium iron battery adopts advanced technology, Own Longest Cycle Life: Offers up to 20times longer cycle life and five times longer float /calendar life than lead acid battery, helping to minimize replacement cost and reduce total cost of ownership.

Advantages for LifePO4 Batttery To for 19’Rank applaction
  • Battery Management System built-in which protects the battery from short circuits, overloads and deep discharge.
  • Built-in automatic protection for over-charge, over-discharge & over-temperature conditions
  • The BMS also balances cells in order to guarantee longer battery life.
  • Safe Lithium Iron Phosphate Technology
  • Flame retardant system to UL94V-0
  • Thousands of cycles, under normal conditions
  • Excellent high temperature performance -20°C to 60°C
  • Low self discharge rate of 2 years before required recharging
  • High energy density and conversion efficiency
  • Can use most standard VRLA chargers for this system
  • Environmental Friendly, without any heavy metals
  • Maintenance free throughout lifetime
>BMS for LifePO4 Batttery To for 19’Rank applaction
  • Overcharge detection function
  • Over discharge detection function
  • Over current detection function
  • Short detection function
  • Balance function
  • Temperature protection
Applications for LifePO4 Batttery To Replace SLA Battery
  • Ø Data centers
  • Ø Computer room of financial organizations
  • Ø Computer room of rail transportation
  • Ø Wind-solar hybrid systems
  • Ø Energy storage in areas without power supply
  • Ø Solar power generation grid,
  • Ø Off Grid energy storage systems
> LFR Delivery time
  • Normal, 20-25 days for production
  • As a factory we Can Support Urgent project with 10-15days.
  • OEM brand is free charge.
visit original website

Introduction

Characteristics

HDC SERIES Fast Charge DEEP CYCLE Lead Carbon BATTERY
Voltage: 6V, 12V
Capacity: 6V200Ah~6V400Ah, 12V14Ah~12V250Ah
Designed floating service life: 15~20years @25°C/77°F

> Why the market need Lead Carbon battery

  • Failure modes of flat plate VRLA lead acid batteries in case of intensive cycling

The most common failure modes are:– Softening or shedding of the active material. During discharge the lead oxide (PbO2) of the positive plate is transformed into lead sulfate (PbSO4), and back to lead oxide during charging. Frequent cycling will reduce cohesion of the positive plate material due to the higher volume of lead sulfate compared to lead oxide.

– Corrosion of the grid of the positive plate. This corrosion reaction accelerates at the end of the charge process due to the, necessary, presence of sulfuric acid.
– Sulfation of the active material of the negative plate. During discharge the lead (Pb) of the negative plate is also transformed into lead sulfate (PbSO4). When left in a low state-of-charge, the lead sulfate crystals on the negative plate grow and harden and form and impenetrable layer that cannot be reconverted into active material. The result is decreasing capacity, until the battery becomes useless.

  • It takes time to recharge a lead acid battery

Ideally, a lead acid battery should be charged a rate not exceeding 0,2C, and the bulk charge phase should be followed by eight hours of absorption charge. Increasing charge current and charge voltage will shorten recharge time at the expense of reduced service life due to temperature increase and faster corrosion of the positive plate due to the higher charge voltage.

  • Lead carbon: better partial state-of-charge performance, more cycles long life, and higher efficiency deep cycle​​ 

Replacing the active material of the negative plate by a lead carbon composite potentially reduces sulfation and improves charge acceptance of the negative plate.

> Features for Fast Charge Deep Cycle Lead Carbon battery

  • Combine the characteristics of lead acid battery and super capacitor
  • Long life cycle service design, excellent PSoC and cyclic performance
  • High power, rapid charging and discharging
  • Unique grid and lead pasting design
  • Extreme temperature tolerance
  • Able to operate at -30°C -60°C
  • Deep Discharge recovery capability

> Fast Advantages for FastCharge Deep Cycle Lead Carbon battery

  • Less sulfation in case of partial state-of-charge operation.
  • Lower charge voltage and therefore higher efficiency and less corrosion of the positive plate.
  • And the overall result is improved cycle life.
    Tests have shown that our lead carbon batteries do withstand at least eight hundred 100% DoD cycles.
    The tests consist of a daily discharge to 10,8V with I = 0,2C₂₀, followed by approximately two hours rest in discharged condition, and then a recharge with I = 0,2C₂₀.
  • ≥ 1200 cycles @ 90% DoD (discharge to 10,8V with I = 0,2C₂₀, followed by approximately two hours rest in discharged condition, and then a recharge with I = 0,2C₂₀)
    ≥ 2500 cycles @ 60% DoD (discharge during three hours with I = 0,2C₂₀, immediately followed by recharge at I = 0,2C₂₀)
    ≥ 3700 cycles @ 40% DoD (discharge during two hours with I = 0,2C₂₀, immediately followed by recharge at I = 0,2C₂₀)

> Construction  for Fast Charge Deep Cycle Lead Carbon battery

Lead carbon

CSBattery Lead Carbon Tech USE Three generations of technology Of Lead-Carbon Plates.

> Applications for Fast Charge Deep Cycle Lead Carbon battery

  • Ø Solar power generation grid,       Ø Off Grid energy storage systems, Ø Wind Power Systems,
  • Ø Hybrid energy storage systems,  Ø Home energy storage systems,   Ø Telecom Station
  • Ø Renewable energy storage,       Ø Smart power grids and micro-grids system
  • Ø Electric Powered Vehicles,  Ø Golf Cars and Buggies, Ø Tour bus, Ø Sweeper, Ø Floor cleaning machines,
  • Ø Wheel Chairs, Ø Power Tools, Ø Electric Powered Toys, Ø Control System, Ø Medical Equipments,
  • Ø Forklift, Ø Marine,  Ø RV, Ø Boat,  Ø Pumps,  and so on.

> HDC Delivery time

  • Normal, 30-35 days for production with injection molding Lead-Carbon-plate by ourself
  • As a factory we Can Support Urgent project with 25-30days.
  • OEM brand is free charge.

Specification 12V 6V

Lead Carbon SEALED FREE MAINTENANCE BATTERY

Model Nominal Voltage (V) Capacity (Ah) Dimension (mm) Net Weight Gross Weight Terminal
Length Width Height Total Height kgs kgs
HDC12-20 12 20 166 175 126 126 8.35 8.85 T2
HDC12-24 12 24 165 126 174 174 8.6 9.1 T2
HDC12-30 12 30 196 130 155 167 10.2 10.7 T3
HDC12-35 12 35 198 166 174 174 14 14.5 T2
HDC12-50 12 50 229 138 208 212 17.7 18.2 T3
HDC12-60 12 60 350 167 178 178 23 23.5 T3
HDC12-75 12 75 260 169 211 215 26 26.5 T3
HDC12-90 12 90 307 169 211 215 30 30.5 T3
HDC12-100 12 100 331 176 215 219 33 33.5 T4
HDC12-110 12 110 407 174 208 233 39 39.5 T5
HDC12-120 12 120 341 173 283 287 40.5 41 T5
HDC12-135 12 135 484 171 241 241 45.5 46 T4
HDC12-180 12 180 532 206 215 219 58.5 59 T4
HDC12-200 12 200 522 240 219 223 64.8 65.3 T5
HDC12-220 12 220 520 268 203 207 70.8 71.3 T5
HDC12-250 12 250 520 268 220 224 77.5 78 T5
HDC6-200 6 200 306 168 220 226 31 56.1 T5
HDC6-205 6 205 260 180 246 252 30 57.6 T5
HDC6-225 6 225 243 187 275 275 32.5 39.5 T5
HDC6-230 6 230 260 180 265 272 34.2 53.5 T5
HDC6-280 6 280 295 178 346 350 45.8 63.5 T5
HDC6-300 6 300 295 178 346 350 46.5 98.5 T5
HDC6-340 6 340 295 178 404 408 55 132.5 T5
HDC6-380 6 380 295 178 404 408 57.2 182.5 T5

Download PDF

CSBattery HDC Lead Carbon Battery.pdf

visit original website

Introduction

Products Features:

1.Wide operation temperature range,good activity in low temperature

2.Low self discharge rate

3.Compact design,shorter internal connectors between cells,thus low internal resistance

4.Using AGM separator,makes lower resistance higher assembling pressure to increase deep cycle life

5.Battery case made of high strength ABS

6.Long life design: 10years(>28Ah)

7.Long time discharge

Application

1.Solar system and wind energy

2.UPS/EPS

3.Street signs

4.Communication system

5.Emergency lights signal system

6.Marin/Boat

7.Medical system

8.Pump system

Parameter

GEL 12V Series Battery Parameter
Model Dimentions(mm) weight
(L) (W) (H) (TH) (KG)
GEL12V24AH 165 126 175 182 7.5
GEL12V33AH 195 130 155 155 9.1
GEL12V38AH 196 165 175 182 11.8
GEL12V40AH 196 165 175 182 11.9
GEL12V55AH 231 139 225 225 15.1
GEL12V65AH 348 168 178 178 18.6
GEL12V75AH 260 169 209 209 20.9
GEL12V100AH long 406 174 208 233 28
GEL12V100AH short 329 172 214 243 28
GEL12V120AH 406 174 208 233 32.3
GEL12V150AH 483 170 240 240 41.2
GEL12V200AH 522 240 219 244 55.5
GEL12V250AH 522 240 219 244 62.5

visit original website