120KW Constant Power DC Charging Pile

The KIWI DC fast charging station is a 120 kW dual DC outlet (CHAdeMo and CCS) fast charger with an optional third charging gun that may be designed to satisfy the demands of both European and North American consumers. It can charge all three plugs at the same time and has a cable clamp or cable reactor for better cable management. It is applicable for high-capacity commercial vehicles such as E-buses, logistics vehicles, garbage trucks, and so on.

The KIWI 120 kW DC fast charger allows any electric vehicle driver to go on the road with a fully charged battery in the lowest amount of time. This charging station allows two electric vehicles to be charged at the same time. Not just now, but also in the future, the expandable and modular design ensures the most efficient and seamless charging experience.

Smart Connection Interface

Remote connectivity through LAN, Wi-Fi, or 4G communications is available with KIWI 120kW fast charger. It has an embedded intelligent RFID card reader that allows it to communicate with any OCPP-compliant back-end central office and cloud-based management platform, such as KIW`s subscription-based fast charging management system software for billing, user identification, and power load management for EV charging networks.

Technical Specifications

Rated Power: 120KW
Installation Method: Floor Standing

Charging Mode: Plug and Charge, RFID Swipe Card, Scan QR Code

Input characteristics

Grid Frequency: 50Hz±10Hz
Input Current Range: AC 0A~182A
120KW,AC 0A~182A, 50mm cable
150KW,AC 0A~230A, 75mm cable
180KW,AC 0A~280A, 90mm cable
Input Voltage: Three phase AC 380V±20% (ABC+N+PE)
Power-on Input Impulse current ≤ Maximum input current 120%
Input Protection: Overvoltage, under voltage protection, lightning protection, phase loss detection

Output Characteristics
Output Current: DC 0~200A
Output Voltage: DC 200V~1000V
Output Current Limit Protection: YES
Output Short Circuit Protection: YES
Effectiveness ≥95%
Export Insurance: 250A
Shutdown: Above 70℃
Ripple Factor ≤±0.5%
Stable Current Accuracy ≤±0.5%
Stable Voltage Accuracy ≤±0.5%
Temperature Coefficient ≤±0.2‰
Storage Temperature: -40°C~+80°C
Power Factor ≥0.98 (Above 50% load)
Working Temperature: -30℃~+65℃; -40℃(±4℃) module start-up; de-rating use above 55℃;

Structural electrical
Noise ≤60dB
Altitude ≤2000m
Size: 700✘800✘1880mm
IP Protection Level: IP54
Wind Tunnel: Bottom in top out
Cooling Method: Smart air cooling
Mounting Brackets: Aluminum alloy bracket

Connection Method
Cable Length: 5m/7m Plug
Connection Method: Type C
Plug Standard: European standard CCS2; American standard CCS1
Executive Standard: (European standard) IEC61851;
IEC62196; ISO15118; EN61000-6-4:2007; EN61000-6-2: 2005

Key Features

  • OCPP1.5/OCPP1.6
  • RFID, Plug and Charge and QR Code scan code
  • Smart charging power distribution load management
  • ISO15118/DIN70121, IEC61851 , SAE-J1772 ,IEC62196
  • Wide voltage (200~1000V), wide current (0~100A) output
  • Wi-Fi/Ethernet/4G LTE ,Choose one of three ways to connect
  • 7-inch high-definition LCD capacitive touch LCD, multi-language support
  • Support European standard CCS2, American standard CCS1, China standard GB, three types of charging point

Specification of 120KW.PDF